Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Band Clamp Bolt	5 N.m	44 lb in
Blower Motor Resistor Screws	1.2 N.m	11 lb in
Blower Motor Retaining Screws	1.2 N.m	11 lb in
Blower Motor-to-A/C Assembly Screws	1.2 N.m	11 lb in
Clutch Plate and Hub Assembly Retaining Nut	17 N.m	13 lb ft
Compressor Mount Bolts	4 N.m	35 lb in
Compressor-Clutch Plate and Hub Assembly Retaining Nut	17 N.m	13 lb ft
Compressor-Through Bolts	10 N.m	89 lb in
Compressor-to-Bracket Mounting Bolts	25 N.m	18 lb ft
Condenser Mount Bolts	4 N.m	35 lb in
Controller Retaining Screws	2 N.m	18 lb in
Evaporator Core Cover Screws	1.2 N.m	11 lb in
Expansion Valve Stud Bolts	8 N.m	71 lb in
Front Compressor-to-Bracket Mounting Bolts - 1.8D, 2.0D only	35 N.m	26 lb ft
Heater Core Cover Screws	1.2 N.m	11 lb in
Heater Core Housing-to-Evaporator Housing Screws	1.2 N.m	11 lb in
Heater/Air Distributor Case Assembly Screw	4 N.m	35 lb in
Liquid Pipe Block-to-Expansion Valve Retaining Nut	14 N.m	124 lb in
Liquid Pipe Block-to-Receiver Dryer Retaining Nut	14 N.m	124 lb in
Liquid Pipe Support Clamp Bolts	4 N.m	35 lb ft
Lower Compressor-to-Bracket Mounting Bolts - 1.4D, 1.6D only	45 N.m	33 lb ft
Pressure Transducer	7 N.m	62 lb in
Rear Compressor-to-Bracket Mounting Bolts - 1.8D, 2.0D only	20 N.m	15 lb ft
Receiver Dryer - Band Clamp Bolt	5 N.m	44 lb in
Receiver Dryer-to-Condenser Pipe Block Bolt	5 N.m	44 lb in
Refrigerant Discharge Hose Block-to-Compressor Retaining Nut	33 N.m	24 lb ft
Refrigerant Discharge Hose Block-to-Condenser Retaining Nut	16 N.m	12 lb ft
Suction Hose Block-to-Compressor Retaining Nut	33 N.m	24 lb ft
Suction Hose Support Clamp-to-Engine Bracket Bolt - 1.4D, 1.6D only	4 N.m	35 lb in
Suction Hose Support Clamp-to-Engine Bracket Bolt - 1.8D, 2.0D only	14 N.m	124 lb in
Suction Hose Support Clamp-to-Longitudinal Member Bolt	8 N.m	71 lb in
Upper Compressor-to-Bracket Mounting Bolts - 1.4D, 1.6D only	25 N.m	18 lb ft