FixVault
Home › Chevrolet › 2004 › Optra5 LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 1.4L DOHC - Repair Instructions › Repair Instructions › Exhaust Gas Recirculation Valve Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of EGR Valve
    GM1348511Courtesy of GENERAL MOTORS CORP.
  1. Clean the cylinder head mating surface.
  2. Install a new EGR valve gasket.
    3. NOTE: Refer to Fastener Notice .
  3. Install the EGR valve with the retaining bolts.

    Tighten:  Tighten the EGR valve retaining bolts to 30 N.m (22 lb ft)  .

  4. Connect the EGR valve electrical connector.
  5. Connect the negative battery cable.
About FixVault