FixVault
Home › Chevrolet › 2004 › S10 Pickup › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.3L (Introduction) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating IAT Sensor
    GM10941Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor by gently pushing the sensor into the air cleaner outlet duct until seated.
    2. Fig 2: View Of Intake Air Temperature Sensor Harness Connector
    GM10940Courtesy of GENERAL MOTORS CORP.
  2. Connect the IAT sensor harness connector.
  3. Connect the negative battery cable.
About FixVault