FixVault
Home › Chevrolet › 2004 › S10 Pickup › Repair and Diagnosis › External Pages › Different car › Section 10 (Engine Controls - 4.3L - Introduction) › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new MAP sensor grommet on the MAP sensor.
    Fig 1: Expanded View Of MAP Sensor & Grommet
    GM10933Courtesy of GENERAL MOTORS CORP.
  2. Install the MAP sensor.
  3. Connect the MAP sensor harness connector.
    Fig 2: View Of MAP Sensor Harness Connector
    GM12817Courtesy of GENERAL MOTORS CORP.
  4. Install the engine cover. Refer to Engine Cover Replacement in Interior Trim.
About FixVault