Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Install the engine cover.

Fig 1: Expanded View Of Engine Cover
Courtesy of GENERAL MOTORS CORP.
Install the screws to the engine cover.
Do not fully tighten the screws.

Fig 2: Locating Engine Cover Screws
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the latch screws.
Tighten: Tighten the latch screws to 4 N.m (35 lb in).

Fig 3: Identifying Engine Cover Latches
Courtesy of GENERAL MOTORS CORP.
Install the engine cover bolts to the brackets.
Tighten: Tighten the engine cover bolt to 25 N.m (18 lb ft).
Insert the floor air outlet duct. Refer to Instrument Panel (I/P) Extension Replacement in Instrument Panel, Gages and Console.

Fig 4: Expanded View Of Floor Air Outlet Duct
Courtesy of GENERAL MOTORS CORP.
Insert the instrument panel extension. Refer to Air Outlet Replacement - Center Floor in Heating, Ventilation and Air Conditioning.