FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the circuit board and terminal module.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the cover and 3 screws.

    Tighten:  Tighten the screws to 2.6 N.m (23 lb in).

    Fig 1: View Of Front Wiper Motor Module Cover Screws
    GM348761Courtesy of GENERAL MOTORS CORP.
  3. Install the wiper motor electrical connector.