Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Install the high-mounted stop lamp to the vehicle.
Connect the electrical connector.
Carefully push the electrical connector back into the roof.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the high-mounted stop lamp retaining screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 1: Identifying High Mounted Stop Lamp Retaining Screws
Courtesy of GENERAL MOTORS CORP.