FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis (Single Page) › External Pages › Different car › Section 686 (Engine Control System - 5.3L - Introduction) › Repair Instructions › Throttle Actuator Control (TAC) Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reposition bulk wiring harness connectors aside.
  2. Disconnect the throttle actuator control (TAC) module electrical connectors from the TAC module.
  3. Remove nuts retaining TAC module and remove module.
About FixVault