FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Compartment Door Hinge Replacement › Installation Procedure

Installation Procedure

  1. Position the hinge to the console upper trim plate.
    2. Fig 1: Identifying Upper Hinge to Console Upper Trim Plate Screws
    GM1204246Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 3 screws retaining the upper hinge to the console upper trim plate.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the console upper trim plate. Refer to Trim Plate Replacement - Console Upper .
  4. Install the rear upper garnish molding. Refer to Garnish Molding Replacement - Rear Upper .
About FixVault