FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement › Removal Procedure

Removal Procedure

  1. Remove the console upper trim plate. Refer to Trim Plate Replacement - Console Upper .
    2. Fig 1: Identifying Screws Near Body Control Module
    GM1195800Courtesy of GENERAL MOTORS CORP.
  2. Remove the upper 2 screws located near the body control module.
  3. Move the gearshift into the PARK position.
  4. Position the park brake lever to the full UP position.
    5. Fig 2: Identifying Console Front Retaining Tabs
    GM1174608Courtesy of GENERAL MOTORS CORP.
  5. Hold the console and move forward of vehicle to release the front retaining tabs (1).
    6. Fig 3: View of Rear Console
    GM1174591Courtesy of GENERAL MOTORS CORP.
  6. Lift up on the rear of the console and remove from the vehicle.
About FixVault