FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Instrument Panel Cluster (IPC) Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Cluster Bezel to I/P Screws
    GM1333064Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connections.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the cluster bezel into the I/P opening.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the 4 screws that retain the cluster bezel to the I/P.
  4. Install the I/P center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
About FixVault