Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Starter Heat Shield, Bolts, & Nuts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

If equipped with a 8.1L engine, install the starter heat shield.
Install the starter heat shield bolts, and nut.
Tighten:
- Tighten the bolts to 3 N.m (35 lb in).
- Tighten the nut to 5 N.m (44 lb in).

Fig 2: View Of Starter & Heat Shield

Courtesy of GENERAL MOTORS CORP.

If equipped with a 4.8L, 5.3L, or 6.0L engine, install the starter heat shield.
Install the starter motor. Refer to Starter Motor Replacement (4.8L, 5.3L, and 6.0L Engines) or Starter Motor Replacement (8.1L Engine) .