Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Install the fog lamp assembly (1) to the bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the fog lamp retaining bolt (2).
Tighten: Tighten the bolt to 25 N.m (18 lb ft).

Fig 1: View Of Rear Fog Lamp & Retaining Bolt

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the fog lamp assembly.
Inspect the fog lamp aiming.