FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 448 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Seat Position Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Inflatable Restraint Seat Position Sensor
    GM833594Courtesy of GENERAL MOTORS CORP.
  1. Remove the passenger or driver's seat from the vehicle. Refer to Seat Replacement - Front Bucket in Seats.
  2. Disconnect the electrical connector from the seat position sensor.
    3. CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
  3. Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
  4. Remove the seat position sensor from the seat adjuster track bracket.
About FixVault