FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 465 (Body Front End) › Repair Instructions › Hood Link Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hood link assembly (6) to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolt (5) holding the hood link assembly to the fender.

    Tighten:  Tighten the link assembly to the fender bolt to 25 N.m (18 lb ft).

  3. Install the fender bolt (7) holding the hood link assembly to the hood hinge.

    Tighten:  Tighten the hinge bolts to 25 N.m (18 lb ft).

    4. Fig 1: View Of Hood, Hinge & Bolts
    GM385497Courtesy of GENERAL MOTORS CORP.
About FixVault