FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 685 (HVAC Systems - Manual) › Repair Instructions › HVAC Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the storage compartment. Refer to Storage Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  2. Remove the instrument panel (I/P) trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Right in Instrument Panel, Gages, and Console.
  3. Remove the lower right knee bolster. Refer to Knee Bolster Replacement - Right in Instrument Panel, Gages, and Console.
  4. Remove the HVAC control module retaining screws.
  5. Push the HVAC control module forward. Lower the module through the storage compartment.
  6. Disconnect the electrical connector from HVAC control module.
About FixVault