FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 686 (Engine Control System - 5.3L - Introduction) › Repair Instructions › Accelerator Pedal with Position Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting/Connecting APP Sensor Electrical Connector
    GM899725Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (IP) lower closeout insulator panel.
  2. Disconnect the accelerator pedal position (APP) sensor harness connector.
    Fig 2: Identifying APP Assembly
    GM742494Courtesy of GENERAL MOTORS CORP.

    Remove the accelerator pedal mounting bolts (1).

  3. Remove the APP assembly (2).
About FixVault