Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Remove intake manifold. Refer to Intake Manifold Replacement .
Disconnect the electrical connector from the camshaft position (CMP) sensor.

IMPORTANT: Clean the area around the CMP sensor before removal in order to prevent debris from entering the engine.

Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the CMP sensor retaining bolt.
Remove the CMP sensor.