FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 686 (Engine Control System - 5.3L - Introduction) › Repair Instructions › Ignition Coil(s) Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ignition Coils & Spark Plug Wires
    GM339300Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil to the bracket.
    2. Fig 2: View Of Ignition Coil Mounting Bolts
    GM344167Courtesy of GENERAL MOTORS CORP.
  2. Install the ignition coil mounting bolts.

    Tighten:  Tighten the ignition coil mounting bolts to 8 N.m (71 lb in).

    3. Fig 3: View of Ignition Coil Harness Connector
    GM339299Courtesy of GENERAL MOTORS CORP.
  3. Connect the ignition coil harness connector.
    4. Fig 4: View Of Spark Plug Wires At Ignition Coil
    GM344169Courtesy of GENERAL MOTORS CORP.
  4. Connect the spark plug wires at the ignition coils.
About FixVault