FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 687 (Lighting Systems) › Repair Instructions › Backup Lamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rear License Frame
    GM1251005Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear license frame, if equipped.
  2. Remove the rear license plate.
  3. Remove the backup lamp assembly retaining screws.
  4. Partially remove the backup lamp assembly to expose the backup lamp sockets.
  5. Remove the backup lamp sockets from the backup lamp assembly.

    Rotate the sockets counterclockwise to release the locking tabs.

  6. Remove the backup lamp assembly from the vehicle.
About FixVault