FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 687 (Lighting Systems) › Repair Instructions › Headlamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the upper grille applique molding. Refer to Grille Applique Molding Replacement - Upper (Molding Assembly) or Grille Applique Molding Replacement - Upper (Bow Tie) in Exterior Trim.
  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Remove the wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Remove the wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front in Body Front End.
  6. Disconnect the electrical connectors from the headlamp bulbs.
    7. Fig 1: View of Headlamp Nuts Sequence
    GM955621Courtesy of GENERAL MOTORS CORP.
  7. Remove the nuts from the headlamp in the following sequence 1, 2, 3.
  8. Remove the headlamp from the vehicle.
About FixVault