Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connecting Speaker to Door

Courtesy of GENERAL MOTORS CORP.

Position the speaker onto the door.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the fasteners securing the speaker to the door.
Tighten: Tighten the fasteners to 2 N.m (18 lb in).

Fig 2: Identifying Speaker Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (1).

Fig 3: Identifying Connector Position Assurance

Courtesy of GENERAL MOTORS CORP.

Install the CPA (1) for the connector.
Install the door trim panel. Refer to Trim Panel Replacement - Door in Doors.