Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Water Pump Inlet

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the thermostat and water pump inlet to the water pump.
Install the water pump inlet bolts.
Tighten: Tighten the water pump inlet bolts to 15 N.m (11 lb ft).

Fig 2: View Of Radiator Inlet Hose

Courtesy of GENERAL MOTORS CORP.

Install the radiator outlet hose.