Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Install the seat belt guide onto the seat back frame studs.
Install the filler piece (2).

Fig 1: Identifying Nuts & Filler Piece

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the seat belt guide to the seat back frame with 2 new dual-component epoxy lock-nuts (1).
Tighten: Tighten the seat belt guide nuts to 11 N.m (8 lb ft).
Install the chrome head restraint trim to the headrest. Refer to Chrome Head Restraint Trim Replacement .
Feed the seat belt through the seat guide loop and install the seat belt anchor bolt. Refer to Seat Belt Replacement - Front in Seat Belts.