FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 700 (Body Rear End) › Repair Instructions › Quarter Panel Protector Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Quarter Panel Protector
    GM1349729Courtesy of GENERAL MOTORS CORP.
  1. Align the quarter panel protector to the rocker panel.
    2. Fig 2: View of Rocker Panel
    GM1349731Courtesy of GENERAL MOTORS CORP.
  2. Pull upward lightly to center the quarter panel protector to the quarter panel.
  3. While holding the quarter panel protector to the quarter panel, pull the backing off the adhesive tapes.
  4. Press firmly on the quarter panel protector to ensure maximum bond to the quarter panel.
About FixVault