FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › External Pages › Different car › Section 709 (Body Front End) › Repair Instructions › Fender Extension Bracket Replacement - Front › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Extension Bracket
    GM1361899Courtesy of GENERAL MOTORS CORP.
  1. Install the extension bracket onto the vehicle.
    2. Fig 2: Removing/Installing Extension Bracket Fasteners
    GM1361896Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the extension bracket fasteners.

    Tighten:  Tighten the extension bracket fasteners to 10N.m (88 lb in).

  3. Install the front fender. Refer to Fender Replacement - Front  .
  4. Install wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front  .
  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
About FixVault