FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Seat Belt Buckle Replacement - Front › Installation Procedure

Installation Procedure

  1. Install the seat belt buckle assembly (1) through the seat cushion cover.
    Fig 1: Identifying Seat Belt Buckle Assembly & Bolt
    GM1200371Courtesy of GENERAL MOTORS CORP.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the seat belt buckle assembly (1) to the seat with the bolt (2).

    Tighten:  Tighten the seat belt buckle bolt to 55 N.m (41 lb ft).

  3. Connect the seat belt buckle electrical connector.
  4. Install the seat in the vehicle. Refer to Seat Replacement in Seats.
About FixVault