FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 4L60-E/4L65-E - Introduction, Service & Replacement › Repair Instructions › Floor Shift Control Knob Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Floor Shift Control Knob & Screw
    GM1335263Courtesy of GENERAL MOTORS CORP.
  1. Install the knob onto the transmission control.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten control knob set screw.

    Tighten:  Tighten the control knob set screw to 2.5 N.m (22 lb in).

About FixVault