FixVault
Home › Chevrolet › 2004 › SSR › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 4L60-E/4L65-E - Introduction, Service & Replacement › Repair Instructions › Heat Shield Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Transmission Heat Shield Bolts & Shield
    GM394459Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the two bolts securing the transmission heat shield to the transmission.
  3. Remove the transmission heat shield from the transmission.
About FixVault