FixVault
Home › Chevrolet › 2004 › Suburban C2500, 8.1 G › Repair and Diagnosis › Engine Performance › System › Engine Control System - 8.1L (Introduction) › Repair Instructions › Ignition Coil(s) Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Spark Plug Wire
    GM470666Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the spark plug wire from the ignition coil.
    • Twist the spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wire from the ignition coil.
  2. Disconnect the ignition coil electrical connector.
    3. Fig 2: View Of Ignition Coil & Bolts
    GM470887Courtesy of GENERAL MOTORS CORP.
  3. Remove the ignition coil bolts.
  4. Remove the ignition coil.
About FixVault