Removal Procedure

The daytime running lamp (DRL) control module is located beneath the instrument panel to the right of the steering column. The module is mounted to the remote control door lock receiver bracket (2).

1. Remove the IP steering column opening trim plate. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left in Instrument Panel, Gauges and Console.
2. Disconnect the DRL control module electrical connector (3).
3. Remove the following components from the vehicle:
   1. The DRL control module mounting bolt
   2. The DRL control module (4)
   Fig 1: View Of DRL Control Module (With Keyless Entry) & Components
   Courtesy of GENERAL MOTORS CORP.