FixVault
Home › Chevrolet › 2004 › Tracker 4WD › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting Systems › Repair Instructions › Daytime Running Lights (DRL) Control Module Replacement (Without Keyless Entry) › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the DRL control module (1) to the vehicle. Secure the module with the mounting bolt.

    Tighten:  Tighten the DRL control module mounting bolt to 10 N.m (89 lb in).

  2. Connect the DRL control module electrical connector (2).
  3. Install the IP steering column opening trim plate. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left in Instrument Panel, Gauges and Console.
    4. Fig 1: View Of DRL Control Module & Electrical Connector
    GM473528Courtesy of GENERAL MOTORS CORP.
About FixVault