FixVault
Home › Chevrolet › 2004 › Tracker 4WD › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System › Repair Instructions › Transmitter Battery Replacement › Removal Procedure

Removal Procedure

  1. Place the remote control door lock receiver transmitter face down on a clean surface.
  2. Insert a small screwdriver into the slot on the bottom of the transmitter.
  3. Carefully turn the screwdriver in the slot until the rear cover releases.
    4. Fig 1: View Of Remote Control Door Lock Receiver Transmitter
    GM493932Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear cover (1) while being careful not to damage the seal (4).
  5. Remove the battery (2) from the transmitter (3).
    6. Fig 2: View Of Transmitter Battery
    GM493936Courtesy of GENERAL MOTORS CORP.
About FixVault