FixVault
Home › Chevrolet › 2004 › Tracker 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Accelerator Controls Pedal Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the accelerator control cable (4) from the accelerator pedal (3).
  2. Remove the accelerator pedal mounting bracket (1).
  3. Remove the accelerator pedal push nut (2) and the accelerator pedal from the mounting bracket (1).
    4. Fig 1: View Of Accelerator Control Cable, Pedal, Mounting Bracket & Pedal Push Nut
    GM55194Courtesy of GENERAL MOTORS CORP.
About FixVault