FixVault
Home › Chevrolet › 2004 › Tracker 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Exhaust Gas Recirculation (EGR) Valve Replacement › Removal Procedure

Removal Procedure

  1. Remove the EGR valve electrical connector.
  2. Remove both retaining bolts (3).
  3. Remove the EGR valve (2).
  4. Clean the remains of the EGR valve gasket (4) from intake manifold (1).
    5. Fig 1: View Of EGR Valve, Gasket, Intake Manifold & Retaining Bolts
    GM419568Courtesy of GENERAL MOTORS CORP.
About FixVault