FixVault
Home › Chevrolet › 2004 › Tracker 4WD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Spring Bumper Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the coil spring. Refer to Front Coil Springs Replacement .
  4. Remove the spring rubber seat (1).
  5. Remove the bump stopper (3).
    6. Fig 1: View Of Coil Spring, Rubber Seat & Bump Stopper
    GM464754Courtesy of GENERAL MOTORS CORP.
About FixVault