FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis (Single Page) › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Idle Air Control (IAC) Valve Replacement › Installation Procedure

Installation Procedure

  1. Install a new O-ring (4).
  2. Install the IAC valve (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten both attaching bolts (3).

    Tighten:  Tighten the bolts to 3.5 N.m (30 lb in).

  4. Reconnect electrical connector.
    5. Fig 1: View Of IAC Valve, O-Ring & Attaching Bolts
    GM419581Courtesy of GENERAL MOTORS CORP.
About FixVault