Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the DRL control module (4) to the vehicle. Secure the module with the mounting bolt.
Tighten: Tighten the DRL control module mounting bolt to 10 N.m (89 lb in).
Connect the DRL control module electrical connector (3).
Install the IP steering column opening trim plate. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left in Instrument Panel, Gauges and Console.

Fig 1: View DRL Control Module (With Keyless Entry) & Components

Courtesy of GENERAL MOTORS CORP.