FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Wheel Speed Sensor Ring Replacement - Front › Installation Procedure

Installation Procedure

  1. Using J 39245  , press the ABS reluctor ring (2) onto the wheel hub. See Special Tools and Equipment .
  2. Install the Front Wheel Hub. Refer to Wheel Hub, Bearing, and Seal Replacement (4WD) or Wheel Hub, Bearing, and Seal Replacement (2WD) in Front Suspension.
  3. Perform Diagnostic System Check - ABS .
    4. Fig 1: Installing ABS Reluctor Ring
    GM589958Courtesy of GENERAL MOTORS CORP.
About FixVault