FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Fuel Cut-Off Valve Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Remove the vapor hose from the fuel cut-off valve.
  3. Remove the 3 screws (3) from the fuel cut-off valve (1).
  4. Remove the fuel cut-off valve (1) and the gasket (2) from the fuel tank.
    5. Fig 1: View Of Fuel Cut-Off Valve, Gasket & Screws
    GM479568Courtesy of GENERAL MOTORS CORP.
About FixVault