FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank from the vehicle. Refer to Fuel Tank Replacement .
  2. Disconnect the electrical connector from the fuel tank pressure sensor.
  3. Remove the two fasteners (1).
  4. Remove the fuel tank pressure sensor (2).
    5. Fig 1: View Of Fuel Tank Sensor, O-Ring Seal & Fasteners
    GM683995Courtesy of GENERAL MOTORS CORP.
About FixVault