FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Idle Air Control (IAC) Valve Replacement › Removal Procedure

Removal Procedure

  1. Remove the electrical connector from the idle air control (IAC) valve.
  2. Remove both attaching bolts (3).
  3. Remove the IAC valve (2).
    4. Fig 1: View Of IAC Valve, O-Ring & Attaching Bolts
    GM419581Courtesy of GENERAL MOTORS CORP.
About FixVault