FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Mass Air Flow (MAF) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove intake manifold air inlet duct (2).
  2. Disconnect the MAF sensor electrical connector (3).
  3. Remove the 2 MAF sensor bracket attaching bolts (5).
  4. Remove the MAF sensor (1) from the air filter housing (4).
    5. Fig 1: View Of Intake Manifold Air Inlet Duct, MAF Sensor, Electrical Connector, Air Filter Housing & Bracket Bolts
    GM451681Courtesy of GENERAL MOTORS CORP.
About FixVault