FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.0L (Introduction) › Repair Instructions › Throttle Position (TP) Sensor Replacement › Installation Procedure

Installation Procedure

  1. Install TP sensor (2).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten both fasteners (3).

    Tighten:  Tighten both fasteners to 3.5 N.m (30 lb in).

  3. Connect the TP sensor electrical connector.
    4. Fig 1: View Of TP Sensor & Fasteners
    GM419576Courtesy of GENERAL MOTORS CORP.
About FixVault