FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.5L (LE8) (Introduction) › Repair Instructions › Fuel Vapor Temperature Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank from the vehicle. Refer to Fuel Tank Replacement .
  2. Disconnect the electrical connector from the fuel tank pressure and fuel vapor temperature sensor.
  3. Remove the two fasteners (1).
  4. Remove the sensor (2) from the fuel tank.
    5. Fig 1: View Of Fuel Vapor Temperature Sensor, New O-Ring & Fasteners
    GM683995Courtesy of GENERAL MOTORS CORP.
About FixVault