FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.5L (LE8) (Introduction) › Repair Instructions › Idle Air Control (IAC) Valve Replacement › Removal Procedure

Removal Procedure

  1. Remove the electrical connector from the idle air control (IAC) valve.
  2. Remove both attaching bolts.
  3. Remove the IAC valve (2) from the intake collector (3).
    4. Fig 1: View Of IAC Valve, Intake Collector & Valve Gasket
    GM674305Courtesy of GENERAL MOTORS CORP.
About FixVault