FixVault
Home › Chevrolet › 2004 › Tracker RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.5L (LE8) (Introduction) › Repair Instructions › Ignition Coil(s) Replacement › Removal Procedure

Removal Procedure

  1. Remove the two fasteners and the ignition coil cover (2) from the valve cover (1).
  2. Disconnect the ignition coil electrical connector.
    3. Fig 1: View Of Ignition Coil Cover Fasteners & Valve Cover
    GM739064Courtesy of GENERAL MOTORS CORP.
  3. Remove the ignition coil retaining bolt (1).
  4. Pull up in order to remove the ignition coil (2).
    5. Fig 2: View Of Ignition Coil & Retaining Bolt
    GM677347Courtesy of GENERAL MOTORS CORP.
About FixVault