Installation Procedure
- Install the inflatable restraint I/P module (1) into the vehicle.
- Install the inflatable restraint I/P module fasteners.
Tighten:
- Tighten the 4 bottom center bolts to 23 N.m (16.5 lb ft).
- Tighten the 2 upper side screws to 5.5 N.m (4 lb ft).
- Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
- Enable the SIR System. Refer to SIR Disabling and Enabling Zone 5 .
CAUTION:
Refer to SIR Inflator Module Handling and Storage Caution
in Cautions and Notices.
NOTE:
Refer to Fastener Notice in Cautions and Notices.