FixVault

Installation Procedure

    Fig 1: Locating Electrical Connectors
    GM787701Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the console.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the dome light. Refer to Figure.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Fig 2: View Of Overhead Console Assembly
    GM787699Courtesy of GENERAL MOTORS CORP.
  5. Install the screws to the rear of the DVD screen.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  6. Fig 3: Identifying Dome Light Bulb Assembly
    GM787690Courtesy of GENERAL MOTORS CORP.
  7. Install the bulbs in the dome light.
  8. Fig 4: View Of Dome Light Lens Cover
    GM787693Courtesy of GENERAL MOTORS CORP.
  9. Install the dome light lens cover.
  10. Fig 5: View Of Overhead Console Assembly
    GM787699Courtesy of GENERAL MOTORS CORP.
  11. Raise the screen and lock the screen into place.