FixVault
Home › Chevrolet › 2004 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Wiper Motor Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the wiper arms. Refer to Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Remove the cruise control and bracket. Refer to Cruise Control Module Replacement in Cruise Control.
  4. Remove the wiper motor. Refer to Wiper Motor Replacement .
    5. Fig 1: Locating Wiper Drive System Module Screws
    GM512038Courtesy of GENERAL MOTORS CORP.
  5. Remove the wiper drive system module screws.
  6. Remove the wiper drive system module from the vehicle.
About FixVault